Overhaul & Repair - Workshop
Emergency Relief Vents
The refurbishing of valves is performed in our dedicated and fully equipped workshop, enabling us to calibrate and recertify valves.
Our workshop is based in the North West of England and has the capabilities of overhauling all types & sizes of tank protection equipment.
Every valve that leaves the workshop will have been rigorously tested to all the recognised standards
"How do they work ?"
These types of vents provide emergency pressure relief in the case of a storage tank fire or other abnormal pressure conditions. As storage tank contents rise in temperature, the emergency relief vent allows for the required venting capacity thus preventing tank rupture. The emergency relief vent will only operate when the relief capacity exceeds the normal venting capacity. Vents are available in pressure/vacuum and pressure only configurations.
Large size vents also allow access into the tank.
"Why is it essential that Emergency Relief Vents should be regularly serviced & maintained ?"
Why is it essential that Emergency Relief Vents should be regularly serviced and maintained?
Diaphragm failures. Emergency Relief Vents use diaphragm sealing arrangement. If the diaphragm should become damaged, then the vent will no longer seal correctly and cause the tank contents to leak out into the atmosphere. This can result in expensive losses of product and the possibility of causing environmental pollution.
Mechanical failures. It is essential for the correct operation of Emergency Relief Vents that all moving parts should be free and move as required. It is possible that over a period of time tank product or other debris may prevent this happening. This can lead to over pressurisation in the tank. The resulting effect being a rupture of the tank resulting in serious financial implications.
Valves can either be sent to our workshop or we can collect direct from site
We strip items to their component parts, inspect and clean
We can also shot/bead blast and re-paint were required.
Equipment is reassembled using all new soft spares and any other spares needed to return the valve to a good working condition. If additional spares are needed the customer is always made aware and photos are provided to show damage or the reasons behind the recommended change.
Once reassembled items are tested for example with a Breather Valves/Vents, weight packages are checked and verified for the required setting and then placed on our calibrated test rig (ISO 28300/API2000 specification) and the leakage rates are recorded in accordance with ISO 28300/API2000.
All performance figures are recorded on a test certificate and a detailed maintenance report is issued for the equipment.